Safety First

CONSOLIDATED

RIGGING & MARINE SUPPLY CO., INC.

1-800-445-8965

Stay In OSHA Compliance With A Hoist Inspection And One Year Certification Hoist Inspections keeps companies in OSHA compliance. Hoist are required to be visually inspected by a qualified person and certified once a year. Every aspect of the hoist must be inspected and any deficiencies must be written up and the owner must bring hoist into compliance to be rendered safe to operate. Promotes a safe working environment.

 

Whether You Have A Mobile Crane, A Ship Crane, Or A Large Container Crane You Have A Crane Inspection Partner In Us Similar to hoist inspections but on a much larger scale. Through our subsidiary RRR Warehouse & Service, Inc., we can inspect mobile cranes, ship’s crane, large container cranes, etc. 


“Avoid Snapping Crane Wires By Letting Consolidated Rigging Replace Your Old Wire Rope and Load Test Your Crane For You” When the wire rope on your crane has reached the end of its lifespan, or if you’re concerned it’s condition is deteriorating and might need testing, call Consolidated Rigging and let us handle all the dirty work. After many hours of duty cycle, the lube on wire rope picks up all sorts of grime. This can lead to damage and breaking of the wire, which is why they must be replaced on a regular basis. We have the equipment, the man power, and the expertise to off load the old rope and install new rope. We also calibrate and adjust to take the slack out and advance if necessary. Not all wire rope change outs are the same: A crane may have a “left lay” and a “right lay” drum which requires skill to install. Additionally, we perform an inspection of the wire rope sheaves which can be the main cause of wire rope failure. We also have the personnel and equipment to load test the crane after installation.

 


“New laws concerning rigging training are coming November 2010. Are you in compliance?” Consolidated Rigging is a certified “train the trainer” Crosby Group Below The Hook instructor. We offer OSHA and ANSI compliance training to staff of companies who handle rigging products. This course is designed to provide the trainee with the basic knowledge and skills to recognize and identify unsafe conditions while using rigging hardware and equipment. It also serves as the pre requisite for CA-004 “Train-The-Trainer” class, and CA-006 Rigging Trainer Development. Here is what this course covers: 1. Define the term “Risk Management” and identify ways to reduce the risk of an accident. 2. Recognize the new expectations required in ASME B30.9 and B30.26 3. Identify unsafe rigging situations that could cause loss of load by evaluating the use of rigging gear. 4. Identify the key questions to ask when developing a Basic Rigging Plan. 5. Identify the general Industry Standards for Rigging Hardware and Slings. 6. Recognize unacceptable operating practices when using Slings per B30.9 and the need to pad sharp corners. 7. Recognize single and multiple leg basics for good load control. 8. Identify a few of the special techniques for good load control. 9. Explain the importance of knowing the weight of the load and discuss ways to calculate. 10. Explain how to find / rig to the center of gravity, and sling loading. 11. Explain the Basics of “The Rigging Triangle” 12. Explain how to calculate loading in the slings using the load multiplier-L/H method. 13. Explain the loading seen at the top fitting in a “Rigging Triangle.” 14. Recognize ASME B30.10 and B30.26 Standards. 15. Explain the need for good material properties in rigging hardware. 16. Recognize the minimum hardware identification requirements per ASME B30.10 and B30.26 and effects of Environment on Rigging Hardware. 17. Discuss proper hoist hook and latch applications. 18. Discuss proper shackle applications. 19. Make attendees aware of pages in workbook discussing proper application of links, rings, turnbuckles, and hoist rings. Discuss proper installation and application of Eye Bolts if not already discussed. 20. Discuss proper installation of Wire Rope Clips. 21. Explain ASME B30.26 Rigging Hardware Inspection Criteria. 22. Explain Crosby Hardware Inspection Criteria. 23. Discuss proper Sling Selection and testing per ASME B30.9. 24. Explain Sling Inspection criteria per ASME B30.9. (Time permitting) Contact Jim Meadows to schedule your course today at 1-800-445-8965

 


“To Ensure The Quality And Safety Of Our Products, Consolidated Rigging Tests The Load Capacity And Even Supplies You With A Record In Case An Inspector Comes Knocking” Proof load testing is what Consolidated does to ensure quality in all of our products. We rig the assembly into our “test bed” and perform a static pull, increasing the tension all the way to double the safe working load. While all of our rigging products are built with a 4:1 ratio for load capacity, we pull to twice that safe working load to ensure the strength and safety of our product line. If that does not satisfy your concerns, we will make an extra assembly exactly like the one that you have ordered and we will perform what is called a “destructive” test. This means we pull the assembly until it is destroyed. We print out a report which graphs the point at which it broke. We believe the safety of our equipment comes down to this: “The proof is in the pudding.” And we happily provide that proof. You will have a record for your files and we will keep a copy as added security. We perform these test for many of our clients. The US Navy has Consolidated Rigging test their rigging on a consistent basis.

 

Rigging Seminars – Certified and trained personnel hold classes that qualify workers to use rigging products in the proper way and how to avoid injury and death.

Fall Protection Seminars – Certified and trained personnel hold classes that qualify workers to use rigging products in the proper way and how to avoid injury and death.

Hoist Inspections – Stay in OSHA compliance. Hoist are required to be visually inspected by a qualified person and certified once a year.

Crane Inspections – We inspect mobile cranes, indoor overhead cranes, large container cranes etc.

Wire Changeouts – Avoid Snapping Crane Wires By Letting Consolidated Rigging Replace Your Old Wire Rope and Load Test Your Crane For You.

Training Seminars – This course is designed to provide the trainee with the basic knowledge and skills to recognize and identify unsafe conditions while using rigging hardware and equipment.
 

Proof Load Testing – To Ensure The Quality And Safety Of Our Products, Consolidated Rigging Tests The Load Capacity And Even Supplies You With A Record.

 

FEATURES

Rigging Seminars

Fall Protection Seminars

Hoist Inspections

Crane Inspections

Wire Changeouts

Training Seminars

Proof Load Testing

Copyright © 2010 - 2012 Consolidated Rigging
Consolidated Rigging - 4700 N. Pearl St. Jacksonville, Fl 32206 - Toll Free (800) 445-8965

 

Avoid Death Or Injury Of Workers And Create A Stronger More Efficient Workforce Certified and trained personnel hold classes that qualify workers to use rigging products in the proper way and how to avoid injury and death.

 

Improper rigging can result in injury or death when workers are lifting heavy weight. This training helps companies to avoid death of workers or injury. An educated work force is a stronger, more efficient work force. This training also fosters pride among workers as they become educated, and to respect the trade and the weight being lifted. This training brings companies in OSHA compliance and reduces liability. 

Fall Safety Is Key

 

"We take great care to provide training, proper equipment and support to help you prevent serious injury."

 

One of the greatest aspects of my role here at Consolidated it to assist you in any way needed when it comes to Fall Safety.  OHSA has very specific rules, regulations and guidelines. It is key that you and your organization stay on top of all the recent changes that effect your business and your employees. You must also have the "right" equipment to protect yourself and your crew from injury.  We have you covered with all your needs. 

 

Take advantage of our many services. If you have any questions, please give us a call!